Jump to content

Mk 12 Special Purpose Rifle

From Wikipedia, the free encyclopedia
(Redirected from SPR mod 0)
United States Navy MK 12 SPR (Special Purpose Rifle)
An SPR
TypeDesignated marksman rifle
Place of originUnited States
Service history
In service2002–2017
WarsOperation Enduring Freedom
Operation Iraqi Freedom
Production history
DesignerNaval Surface Warfare Center Crane Division
Variants
  • SPR, SPR/A, SPR/B
  • MK 12 MOD 0
  • MK 12 MOD 1
  • MK 12 MOD H
Specifications
Mass10 lb (4.5 kg) (fully loaded, heavy barrel and optic mounted)
Length37.5 inches (952.5 mm)
Barrel length
  • MOD 0/1 variant:
    18 in (457.2 mm)
  • MOD H variant:
    16 in (406.4 mm)

Cartridge5.56×45mm Mk 262
ActionGas-operated, direct impingement, rotating bolt
Muzzle velocity2,750 ± 20 ft/s (838.2 ± 6.1 m/s) using Mk 262 Mod 1 ammunition
Effective firing range700 m (770 yd)
Feed system20- or 30-round STANAG magazine[1]

The United States Navy Mk 12 MOD 0/1/H Special Purpose Rifle (SPR) is a designated marksman rifle that was in service with United States Special Operations Forces in the designated marksman role until 2017, also designed to be shorter than standard weapons.[2][3] SPR initially stood for Special Purpose Receiver as it referred to an add-on upper receiver assembly (part of the proposed SOPMOD upgrades),[4][5] but that nomenclature changed to Special Purpose Rifle as the weapon became a stand-alone weapons system.[6]

The SPR was eventually type-classified by the U.S. Navy as the Mk 12.[6] The weapon was developed by the Naval Surface Warfare Center Crane Division for US military special operations units.[6]

The rifle is designed to fire semi-automatically, although it has the option to fire in full auto in case of emergencies.[7]

History

[edit]

Early experience in influencing the SPR was from American forces deployed in Somalia when they used different optics, ammo, triggers, free float hand guards and rail systems for their rifles.[8]

The SPR concept was originally proposed by Mark Westrom, president of ArmaLite, while working at Rock Island Arsenal in 2000.[7] Its design group included John Noveske and Steve Holland.[9] The program was an outgrowth of the desire by both US Army and Navy special operations forces for a rifle with greater effective range than an M4 carbine but shorter than an SR-25. The SPR program appears to have grown out of both the SOPMOD Block I program, and the U.S. Navy SEALs Recon Rifle, a 16" flat-topped M16 carbine. Early models included the SPR, SPR/A, and SPR/B. The Naval Surface Warfare Center, Crane Division expanded on the Recon Rifle.[7]

Initial tests were conducted in October 2000 in order to determine any weaknesses with the first SPR rifles manufactured.[2] From 2000 to 2001, all errors were corrected for the second production of SPRs.[2] The first SPRs were issued in 2002.[4]

The Mk 12 Mod 0 was only used by the US Army Special Forces while the Mk 12 Mod 1 was used by the Rangers, Navy SEALs and Special Tactical Teams.[2] The USMC also used the Mk 12 Mod 1 towards the end of the war in Iraq and extensively in Afghanistan.[10][11] They were mostly deployed as DMRs.[4] The Mk 12 Mod H was used primarily by Army SOF and SMUs, and featured a retrofit upper of the Mod 0 with PRI Gen3 round hanguards and a shorter RECCE rail to replace the original Swan Sleeve, reducing weight, and either Douglas or Noveske barrels made with the SPR profile in a rifle length gas system. [9]

The Mk 12 was phased out of service in 2017.[12]

Design

[edit]

Upper receiver

[edit]

The majority of the SPR upper receivers were initially supplied by Colt, with others being produced by Diemaco (now Colt Canada).[2] Colt had been outsourcing parts of its production to Diemaco for several years, then purchased Diemaco in February 2005. It is unclear whether the upper receivers for the later SPRs came solely from ArmaLite, or were a mix of receivers from ArmaLite and Colt/Diemaco.

All of these upper receivers are flat-topped, but have been seen with either the old-style teardrop forward assist or the newer round style.[7]

Lower receiver

[edit]

When the SPR program was still just an upper receiver assembly (and not a complete rifle), Crane assembled all of its prototypes using either M16A1 or M4A1 lower receivers, because the full auto trigger group in these lower receivers provided a consistent pull while the more common 3-round burst trigger groups didn't.

While a number of trigger options were tried in the end, the Knight's Armament Company (KAC) 2-stage trigger was finally decided upon as the standard.[7] Most of the obsolete M16A1 lower receivers were turned into NSWC Crane for disposal.[2]

Barrel

[edit]

An 18-inch (457 mm) (MOD 0/1) or 16-inch (406 mm) (MOD H) threaded-muzzle match-grade free floating stainless steel heavy barrel with a 1:7 (178 mm) rifling twist ratio is standard for the SPR.[11][3][13]

The barrels are manufactured by Douglas Barrels with a unique contour that reduced weight but maintained rigidity for accuracy.[14] An OPS Inc. muzzle brake and collar (to align the OPS Inc. 12th Model Suppressor) is installed with the barrel.[14]

These barrels were designed to take advantage of the new Mk 262 cartridge, which uses a 77-grain (5 g) bullet.

Some early Mod H's were made using Noveske barrels but eventually switched back to the Douglas barrels commonly shared across the other variants. [9]

Stock

[edit]

SPRs have been seen with M16A1 or M16A2 fixed buttstocks, telescoping M4 buttstocks, and the Crane Enhanced telescoping buttstock.[2] The rifles are compatible with any type of stock system developed for the M16.[7]

Handguards

[edit]

In all cases a free-floating forearm is used, which does not touch the barrel directly. This increases the accuracy of the weapon by removing vibration and pressure exerted on the barrel by the rest of the gun. The first SPRs used PRI Gen I or Gen II carbon-fiber free-float tubes. The SPR/A, SPR/B, and MK 12 MOD 1 all use the Knights Armament Company M4 Match Free-Floating Rail Adapter System, KAC part number 99167.[2]

The Mk 12 MOD 0/H uses PRI Gen III free-float tubes.[2] The Gen I and Gen II Freefloat Forearms are combined with the Atlantic Research Marketing Systems #38 SPR MOD Sleeve, while the Gen III Freefloat Forearm, due to its larger barrel nut, only works with the ARMS #38 SPR PEQ-2-3.

Accessories

[edit]

The original SPR used an early PRI flip-up front sight with an elevation dial, which has since been discontinued. The Mk 12 MOD 0/H uses the current PRI flip-up front sight. The SPR/A, SPR/B, and Mk 12 MOD 1 use the KAC rail forend flip-up front sight, KAC part number 99051. The SPR and Mk 12 MOD 0/H use the ARMS #40 flip up rear sight. The rest of the models use the KAC 600 meter flip up rear, KAC part number 98474.

Due to the relative modularity of the system, optics (as well as almost everything else) can be mounted according to the operator's wishes. However, SPRs are most often seen with a 3.5–10×40 mm Leupold LR M3 (SPR/A), a 2.5–8×36 mm TS-30 (SPR/B), or a 3–9×36 mm TS-30 A2 (Mk 12 MOD 0/1) Mid Range/Tactical Illuminated Reticle Dayscope. Night vision devices can also be attached. These scopes usually come with flip open dust covers and a honeycomb anti-glare anti-reflection device. Given Nightforce Optics' NAVSPECWAR contract, it is believed that many NAVSPECWAR issued SPRs will use the Nightforce 2.5-10x42 NXS scope.[15]

A long accessory rail, called a Swan Sleeve (ARMS SPR MOD or ARMS #38 SPR PEQ-2-3), manufactured by ARMS, is installed, running the length of the rifle.[2] The SPR/A and SPR/B both used the KAC M4 Match FF RAS, KAC part number 99167. Two ARMS #22 Throwlever 30 mm steel rings are used to mount the dayscope. The SPR/A, SPR/B, and Mk 12 MOD 1 use ARMS #22 high rings, while due to the increased height from the SWAN Sleeve, the SPR and Mk 12 MOD 0/H use ARMS #22 medium rings. An under-the-handguard ARMS #32 Throwlever mount is used to mount the Harris bipod (the ARMS #42 Throwlever mount is used to mount the Versa-Pod); this features a quick release action. Nightforce Ultralite 1.375" rings were also alternate issued rings, primarily with Nightforce riflescopes from Crane.

Originally the relatively expensive Parker-Hale swivel bipods were used, but were taken off the system after the initial SPR.[citation needed] Currently, a Harris swivel model bipod is typically used with the SPR, and is sometimes seen with a KMW Pod-Loc tension adjustment device.[11] As mentioned above, the bipod is mounted via an ARMS #32 throwlever device attached to the bottom rail of the rifle's forearm.[2] The ARMS mount is used on both the MOD 0 and MOD 1.[2]

The OPS Inc. 12th Model SPR Muzzle Brake Suppressor threads directly onto the OPS Inc. muzzle brake and uses the collar to stay centered for Mk 12 MOD 0/1 models.[2] The first 100 suppressors were made in RD Systems in South Beloit, Illinois.[16]

In 2014, Ops, Inc stopped manufacturing this model of suppressors. The equivalent product is currently manufactured by Allen Engineering Co as the AEM5. The AEM5 is essentially the same suppressor design and actually built by the same individual, Ron Allen, who previously fabricated the 12th model suppressor for Ops, Inc.[6] Other models of this suppressor are also produced that look the same from the outside, but are fundamentally different suppressors.[17]

Ammunition

[edit]

The SPR is not used to fire standard issue 5.56mm M855A1, M193 ball, or M856 tracer ammunition.[11] Due to the limits in terminal performance and relatively poor accuracy of the 62-grain (4 g) M855 ball, the Mk 262 Open Tip Match (OTM) round was developed and manufactured by Black Hills Ammunition as a more accurate round for the SPR. The first production batches were designated Mk 262 MOD 0 and used a Sierra MatchKing 77-grain (5 g) Hollow Point Boat Tail bullet without a cannelure (crimping groove).[18]

Black Hills then approached the Nosler bullet manufacturing company, who made a similar 77 gr (5.0 g) OTM bullet, and Nosler agreed to supply cannelured bullets to Black Hills.

The newer load was designated Mk 262 MOD 1.[19] Recently, Sierra added a minimal cannelure to its bullet, and this has since replaced the Nosler bullet in the current versions of Mk 262 MOD 1. In late 2014, Sierra introduced a tipped version of this bullet which adds a polymer tip to improve ballistics.

This new bullet was found exclusively in an upgraded version of the Black Hills Ammo MK262 MOD 1 loading, but this bullet has been released by Sierra to reloaders prior to the end of 2014. The Sierra part number for this bullet is 7177.

Clones

[edit]

The Mk 12 SPR has been manufactured by various firearms companies as clone rifles after the Mk 12 was phased out.

Centurion Arms manufactures clones of the Mk 12.[20] Troy Industries made a retro Mk 12 for sale in 2017.[21] Oberland Arms released a version of the Mk 12 in 2019.[22]

Palmetto State Armory released clones of the Mk 12 Mod 0, Mod 1, and Mod H in 2023 known as the Sabre Mk 12. Precision Reflex Inc unveiled a Mk 12 rifle chambered in .308 Winchester in SHOT SHOW 24 in January 2024.[23]

[edit]

See also

[edit]

References

[edit]
  1. ^ "MK12 SPR | US Special Operations | Weapons".
  2. ^ a b c d e f g h i j k l m "The Mk12 SPR (Special Purpose Rifle) – Small Arms Defense Journal".
  3. ^ a b "Mk12 Mod H Parts List". clonerifles.com.
  4. ^ a b c "Mk 12 SPR". 3 April 2020.
  5. ^ "An Official Journal of the NRA | Daniel Defense MK12 Rifle".
  6. ^ a b c d Pike, John (2011). "Mk 12 Special Purpose Rifle". Retrieved July 30, 2014.
  7. ^ a b c d e f Rottman, Gordon (2011). The M16. Osprey Publishing. pp. 46–47. ISBN 978-1849088916.
  8. ^ "Gunfighter Moment - Daryl Holland - Soldier Systems Daily".
  9. ^ a b c ""Mk12 Mod H 16" Holland RECCE rifle from PRI - Precision Reflex"".
  10. ^ Bolke, Daryl. "MK 12 Navy SEAL Steel". Tactical Life. Archived from the original on 2012-10-24. Retrieved 2011-06-22.
  11. ^ a b c d "II MEF Marines Receive Training on the New Rifle". US Fed News Service. October 2, 2007. Archived from the original on August 8, 2014. Retrieved July 30, 2014.
  12. ^ https://blog.primaryarms.com/guide/spr-rifle-mk-12s-and-ar-15-clones/
  13. ^ "PRI Mk 12 Mod H". Archived from the original on 2022-02-07. Retrieved 2022-04-23.
  14. ^ a b "Mark12 Mod 0 SPR". www.precisionreflex.com. Archived from the original on 30 April 2014. Retrieved 15 January 2022.
  15. ^ "$10.7M in 7,700 Special Ops Rifle Scopes". Defense Industry Daily. 2005-02-11. Archived from the original on 2015-05-13. Retrieved 2009-03-22.
  16. ^ "Allen Engineering and the Silencer for the MK12 -". 11 July 2016.
  17. ^ "Ops Inc 12th model style Suppressor Comparison". YouTube.
  18. ^ "Reviewing Black Hills' MK 262 Mod 1 Ammo – Shooting Times". Archived from the original on 2018-10-18.
  19. ^ "Black Hills' Mk 262 Mod 1 | Rifles | Guns & Ammo". 25 January 2013. Archived from the original on 25 January 2013.
  20. ^ "Centurion Arms Mk12 Special Purpose Rifle: Best 5.56 DMR?".
  21. ^ "SHOT Show 17 – Troy Defense".
  22. ^ https://www.all4shooters.com/de/shooting/buechsen/oberland-arms-custom-shop-diese-spezialanfertigungen-und-sondermodelle-erhalten-sie-beim-ar-spezialisten/
  23. ^ "[SHOT 2024] PRI Unveils MK12 in .308 Winchester".